STANDARD BITS 
    Ø 3 mm                        
    Ø 4 mm                        
    Ø 6 mm                        
    Ø 1/8" (3.18 mm)         
    OTHER Ø                     
    "BOX BITS"                  
    PARALLEL BITS           
    SPECIAL SHAPES         
   
    "GRAVO"-TYPES  
    Ø 3.18 * 105 ... 130      
    Ø 4.36 * 155 ... 185      
    
    SERVICE   
    GRINDING TIPS           
    COATING                     
    
    
    
      
    
     
    
    
    
    
    
    
    
 
 
 
 
 
 
 
 
 
 
 
 
 GP30  Ø=3 mm, l = 38 mm, tip angle 0°. Ground ready to use.
Parallel engraving bit / engraving cutter
Solid tungsten carbide cutters, single sided with a parallel tip. Cutting shape like a "normal" end mill with width b and plunge depth t. The halfening flat and cutting edge are polished.

Tools like these are frequently used in cardboard / packing industry as so-called "channel mills". The purpose is to cut channels into counter sheets made from pertinax or steel. For this operation high diameter accuracy and tool lifetime is required. Gegenüber einem gewöhnlichen spiralisierten Fräser sind die parallelen Stichel wesentlich robuster.
 GP30...
 Code b t
 GP30.0050  0.50   1.20  
 GP30.0060   0.60   1.20  
 GP30.0070  0.70   1.50  
 GP30.0080  0.80   1.50  
 GP30.0090  0.90   1.70  
 GP30.0100  1.00   1.90  
 GP30.0110  1.10   1.90  
 GP30.0120  1.20   1.90  
 GP30.0130  1.30   1.90  
 GP30...
 Code b t
 GP30.0140  1.40   1.90  
 GP30.0150   1.50   2.10  
 GP30.0160  1.60   2.10  
 GP30.0170  1.70   2.10  
 GP30.0180  1.80   2.10  
 GP30.0190  1.90   2.10  
 GP30.0200  2.00   2.10  
 GP30.0210  2.10   3.00  
 GP30.0220  2.20   3.00  
 GP30...
 Code b t
 GP30.0230  2.30   3.00  
 GP30.0240   2.40   3.00  
 GP30.0250  2.50   3.00  
 GP30.0260  2.60   3.00  
 GP30.0270  2.70   3.00  
 GP30.0280  2.80   3.00  
 GP30.0290  2.90   3.00  
 GP30.0300  3.00   3.00  

 

Parallel engraving bits / engraving tool
 Code

Prices Euro, VAT excl. 

1-4 5+ 10+ 20+
 GP30.0050 ... GP30.0300        14,45 13,30 12,10 11,55
Hint: This type of tool can be manufactured with any other dimensions. As standard we produce cutters with shank diameter 1/8" (3.175 mm) as well. 

  þ = Standard article. Always shipped within one week.  All prices are charged with German VAT(19%) if the client resides
  within the EC and has no VAT-ID number.

  You need bigger quantities? Ask for an individual offer.

 
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021