GIS PREMIUM BITS     
    F112                             
    F113 ... F115                
    F120                             
    F215                             
    F221                             
    F240                             
    F260 ... F265                
    F280                             
   
   
    GIS ECONOMY BITS   
    F041                             
    F048                             
    F126                             
    F225                             
    F246                             
    F247 ... F248                
    F261                             
   
   
    GIS PCB BITS              
    FPCB.UC                      
    more...>>>>>                
    GIS SPECIAL BITS      
    FV09                             
    more...>>>>>                
    GIS CMT-BITS             
    C190                             
    more...>>>>>                
    MISCELLANEOUS        
    COATINGS                   
    OTHER TYPES            
   
   
 
 
 
 
 
 
 
 

 Router bits F215

GIS Premium Bits  

F215: Plastic bit, polished chip flutes
 

F215: Plastic bit, polished chip flutes. Solid tungsten carbide, upcut.
Long, sharp and balanced!


For routing plastics, foams (PUR, Forex, ...), wood, aluminium und other material for which a sharp cutting edge is important. These router bits offer all advantages of single flute router bits (like F113), without being unbalanced. Therefore these router bits can be used with high frequency spindles without any limitation.

We can deliver F215 with all common coatings, however normally we do not recommend coating these bits for standard applications.
F215.0600.45.T100
Code Ød1 L1 LG ØS  Remarks  Prices Euro, VAT excl.
mm mm mm mm 1-4 5+ 10+ 20+
F215.0300 3.00 12 50 3   43,50 40,02 36,54 34,80
F215.0300.22 3.00 22 60 3   45,60 41,95 38,30 36,48
F215.0400.22 4.00 22 60 4   46,50 42,78 39,06 37,20
F215.0400.32 4.00 32 80 4   49,50 45,54 41,58 39,60
F215.0400.45.T120 4.00 45 120 4   67,20 61,82 56,45 53,76
F215.0600.45.T100 6.00 45 100 6   62,70 61,82 56,45 53,76
F215.0600.45.T150 6.00 45 150 6   72,60 66,79 60,98 58,08
F215.0800.55 8.00 55 110 8   69,00 63,48 57,96 55,20
F215.0800.55.T150 8.00 55 150 8   78,50 72,22 65,94 62,80
weitere Größen in Vorbereitung                  
                   
        ØS = shank diameter
      LG = total length
    L1 = cutting length
  Ød1 = cutting diameter
= Standard article. Always shipped within one week.  All prices are charged with German VAT(19%)  if the client resides within the EC and has no VAT-ID number.
You need bigger quantities? Ask for an individual offer.
GIS Gienger Industrie-Service • Segantinistr. 5 • CH - 8049 Zurich • Tel. / Fax +41-(0)44-341 5028 • mail: info@gis-tec.com
Warehouse EC • Weimarstr. 15 • D - 78532 Tuttlingen • Tel. +49-(0)7461-162020 • Fax 162021